baisheng laser china laser equipment manufactuer

About Laser Machine

Home About Laser Machine

New Way to Fast Align the Laser beam with Integrated Co2 Tube Red Pointer

New Way to Fast Align the Laser beam with Integrated Co2 Tube Red Pointer

  • 2019/07/26
New technology ,New way to align co2 laser beam !
Advanced Laser tube with red pointer ,Less Work for co2 laser beam alignment ! much easier to align the laser beam.there is sheer unnecessory to press “pulse” each step before adjusting the screws.
Laser mirror alignment and lens focusing is necessory before cutting or engraving for the co2 laser machine.
Right now ,there is a new kind of lalser tube :coaxial red pointed CO2 laser tube,the red module is designed to work with separate 5V DC, or it can be connected to power supply and laser machinecontrol card.
It can accurately visualize the laser transmission path during laser path alignment, making the adjustment more precise and convenient, and safer operation of laser.
It also can be used for preview and positioning during laser processing.
Baisheng laser company has been in field of laser for 15 years ,there are more than 60,000 sets co2 laser engraving cutting machine of Baisheng make are using around the world. We are trying to provide all operators a machine with easier work ,convenient operation .
China Baisheng cnc laser CO2 aser tube  Installation instructions
1. Make sure the electrodes are connected correctly;
2. The cooling water pipe installation. When installing water pipe, please make sure the cooling water inlet must follow from the positive to negative, and down into the water, and the interface is not leaking. Before starting the laser tube must store enough water in the water cooling pipes and no air bubbles before use (must check every time before start laser tube). If the laser tube is mounted vertically, please ensure that no air bubbles at the top of the laser tube. It will cause thermal shock when it runs with air bubbles in the water pipe, which is easy to damage your laser tube.

3. To maintain the good performance of laser tube, keep the cooling water temperature between 20-25 °C. The instability of cooling water's temperature will influence laser tube output power.
4. When installing the laser tube, please try to ensure the 1/4 point in laser tube length is on laser tube holder, this can help your laser tube get best working performance. And leave enough space between the laser tube positive end (it has high voltage electricity) and any metal surface of your laser machine. If the space is not big enough, it will cause ignition between high voltage power used to trigger the laser tube and the metal surface of laser machine, and thus lead to laser tube damage and even breakdown of major electronic components on your laser machine.
5. Recommend laser machine consumers to put automatic checkout device into your laser tube water cooling system to prevent laser tube stoppage due to overheating failure caused by lack of water when laser tube is working, please consult your laser machine supplier for details.

co2 laser beam alignment


Easy a few steps ,operator can finish the mirror alignment works and start cutting and engraving.


Copyright © 2021 Guangzhou Baisheng Electron Technology Co.Ltd.All Rights Reserved. Powered by dyyseo.com

#

#

Leave a message

Leave a message

    Any inquiries and suggestions are welcomed and we are pleased to answer!